• Available for 8"x 31', 41', and 51' lengths. 10"x 31' length also available.
• It has a simple design with the motor mounted on the upper end of the flighting with roller chain flexible coupling. Pipes run down to near the bottom for hydraulic hose hook-up.
• Especially made for tight positions, alleyways, bins, or buildings.
• Hydraulics needed: 12 to 14 gallons per minute at a pressure of 1600 PSI for the 8"x 31' auger. 12 to 14 gallons per minute at a pressure of 2000 PSI for longer augers.

At PECK we take quality very seriously... Check out these features:	HEAD DISCHARGE The discharge assembly has a spring loaded safety release door which prevents plugging. A rain proof cover protects drive parts.	TRUSS A welded truss support frame holds the 1/2" truss rods. Rod tension is adjustable. It is used on all augers 51' and longer.
WINCH The brake winch has 5.5 to 1 reduction for 8" augers and a 12 to 1 reduction on 10" augers for ease of raising. The winch has built-in self activating friction brake with positive holding action while raising or lowering.	FRAME & WHEELS The vertical frame hinges 2' ahead of the axle to give more reach over the bin eaves. The spindles are high speed with tapered roller bearings packed with grease.	AUGER INTAKE Heavy bars form the intake cage, with a mesh guard which provides protection from injuries. The three bolt flange mounted porous bronze bearing is greaseable.

Model Comparison
Specifications Chart

ŠThe Right Angle Advertising